Updated 05-Aug-2017 • tags apps, pickers, balinese
This Unicode character picker allows you to produce or analyse runs of text using the Balinese script. Character pickers are especially useful for people who don't know a script well, as characters are displayed in ways that aid identification.
If something is broken or missing raise an issue. For version information see the Github commit list.
Sample text If you want to add some sample text to the text area, click on the icon.
Fonts To properly display the text you will need to choose a font that is loaded on your system or device, or use the web fonts downloaded with the page (Aksara Bali WF, and Noto Sans Balinese WF).
Browser support for the Askara Bali and Noto Sans Balinese fonts varies! Examples: Internet Explorer 11 doesn't hide adeg-adeg in consonant clusters and doesn't correctly join vowel signs with the preceding consonant. Firefox and Chrome fail to produce the post-fixed form of ra repa in the sequence <consonant, adeg-adeg, ra repa>. Chrome on iOS does this correctly, however. Safari seems to work well on the Mac and iOS.
The following words illustrate the issues. In Bali Aksara webfont: ᬧᬓ᭄ᬋᬋᬄ, ᬓᬺᬰ᭄ᬡ, and ᬩᬸᬤ᭄ᬟ. In Noto Sans Balinese webfont: ᬧᬓ᭄ᬋᬋᬄ, ᬓᬺᬰ᭄ᬡ, and ᬩᬸᬤ᭄ᬟ.
You will also find that support for combining characters varies. You can change the appearance of combining characters in the picker table using
more controls > CC base. By default there is no base. For some browsers you will need to set it to the dotted circle. (You can set this in your bookmark by adding
?ccbase=%E2%97%8C to the end of the URL.)
When working on an iPad or similar device, you should turn off
Autofocus (just below the text area). This prevents the keyboard popping up after you input every character. You may also need to select a character twice to add it to the output field.
Includes characters in the Unicode Balinese block. Musical symbols are not included. Symbols used for Sasak are included in the advanced section.
All text is output in Unicode normalisation form NFC by default. You can change to NFD or no normalisation by clicking on the buttons in the yellow area. Note that normalization only takes place when you click on a character - text pasted into the box won't be normalised until you click on another character above, or click on a button in the yellow area.
Select the thing you want help with:
This is where you see characters appearing as you select them from the panels lower down or where you paste text into the picker. Once you have some text here, you can perform various operations on it, or simply copy it to the clipboard for use elsewhere.
The controls just above the text area allow you to interactive with the text in various ways. They mostly work on highlighted text within the text area, or if there is no highlight they work on all the text. Controls near the bottom of the picker allow you to change font, font size, line-height, text direction, etc.
Controls above the input box allow you to run various operations on the text in the box. Most of them work on what you have selected within the box, or the whole box if nothing is selected.
Copy, select, delete, etc. (). The icons on the left above the input box allow you (listing them from left to right) to copy the text to the clipboard, select the text, delete it, generate a URL to share with others that will reproduce for them what you see in the text box, add some sample text to the text area, and open this help file.
Show codepoints. Produces a list of the Unicode code points in the input box. You can usually follow a link from a code point item to more detailed information about that character.
Convert to escapes. Opens a new window for the converter app, which shows various different ways of representing the text in the input box using escapes.
Make example. This may be useful to speed up the creation of examples. You can create an example with four parts, delimited by /, in the following order:  Arabic text,  IPA transcription,  other transcription,  meaning. You don't need to add all four elements, but if you want to skip one in the middle of the sequence, use //.
For example, the following (which is displayed here more as you'd type it than see it):
<span class="ex" lang="ban">ᬯ᭄ᬬᬦ᭄ᬚᬦ</span> <span class="trans">wianjana</span> <span class="meaning">consonants</span>
To get just the Balinese and the transcription you would use:
Character markup. This may be useful to speed up the creation of markup for a specific character or set of characters. Select one or more characters in the text area, then click this button. It will return something like the following for each of the characters:
<span class="codepoint"><span lang="ban">ᬯ</span> <span class="uname">U+1B2F BALINESE LETTER WA</span></span>
When you add it to your document, it will look like this.
ᬯ U+1B2F BALINESE LETTER WA
This area receives the output of various tools. Note that the text is editable.
The icons to the right ( ) allow you to copy the contents of this area to the clipboard, insert the contents into the main text area, or close this subwindow, respectively. When you insert the contents of this subwindow into the main text area, the text will overwrite any highlighted text, otherwise it will just be inserted at the current cursor position.
Some conversions produce ambiguous output. In this case, you will be offered two alternatives on a yellow background, eg. presents you with the alternatives 'h' or 't'. Simply click on the alternative you want, and the picker will discard the rest.
As you mouse over characters in the selection areas of the picker, you will see the code point and character name appear here.
When working on an iPad or similar device, you should set this to Off. This prevents the keyboard popping up after you input every character.
The vertical grey bar to the left allows you to turn on/off a number of panels that can help create the text you want.
Default. Turns off all input aids and closes all panels.
Latin characters. Displays a panel of lowercase Latin characters you are likely to need for transcription.
Left-hand controls. These controls at the bottom of the page allow you to modify fonts used, the font size, line height, and the height of the text area.
Search for. If you are searching for a particular character and know (at least part of) the name or the codepoint, type that in the search box and hit return. All characters with matching text in the name or codepoint number will be highlighted. The highlighting is only removed when you click on the X next to the search input field. You can also use regular expression syntax to improve your search results. For example, to find the letter 'ha', but not 'gha' etc, you can use \bha\b (or the shortcut, :ha:).
Click on more controls to reveal the less commonly used controls described here.
Normalise. All text is added to the main text area in Unicode normalisation form NFC by default. You can change to NFD or no normalisation by clicking on the buttons in the yellow area. Note that normalization only takes place when you click on a character – text pasted into the box won't be normalised until you click on another character above, or click on a button in the yellow area.
Change table font. Allows you to change the font and size of the characters you click on in the main selection areas.
CC base. You would normally expect combining characters, such as accents and vowel signs, when displayed alone to be associated with a dotted circle, however these font glyphs are handled inconsistently from one browser/font to the next. The picker is set up for a given web font initially, but if you change the table font you may need to do something to ensure that combining characters display in a way that helps you click on them.
The CC base control allows you to specify a base character that will be used before each combining character (or no base character). This should hopefully help for most font and browser combinations.